How Room Heater Works?Let’s Know

working of room heater in deatils
working of room heater

A basic room heater works by heating some type of element (usually a wire like a nichrome wire) and either allowing radiation to dissipate heat; Or by forcing air over the heating element with a fan. So, the room is heated by convection or radiationroom hitter. Electric heat pumps are increasingly used to heat for room.

Principle of Room Heater

They work by catalytic converter metals usedheat into electricity as heating elements. Metals have a high resistance that allows a certain amount of current flow directionalthough providing them with the necessary heat. Electric energy is converted into heat energyand the relationship between wattage and Btu / hr. is:

1 watt = 3.415 Btu / hr.

There are three types of electrical resistance heating wires that are used today

Open wire consists of a nickel chromium resistance wire mounted on ceramic or mica insulation. For safety reasons, they should be protected and should not contact users or metal objects. This protection is important to prevent the risk of electric shock.

Open ribbon is similar to open wire type material, but has a greater surface area that is exposed to air exposure. It should also be protected to prevent the danger of electric shock to users.

The tubular casing wire uses nickel chromium resistance wire which is surrounded by a magnesium oxide powder which is then enclosed in a heat steel tube. This tube protects users from the risk of electric shock.

Heaters for homes:

One of the commonly used natural convection room heater,heating devices is known as the baseboard heating unit. A casing in this unit has electrical resistance, which is naturally designed to move air over elements. They are usually mounted under the window on the wall.When purchasing units; make sure they have safety features such as wire grilles, automatic shutoff control in the event of over-grating, tilt switches and good thermostat control. Look for certification on units like UL or CE mark.

Pros and cons of using electric heaters

The advantages of using electric HTR are

Initial Low Cost Investment. Units are generally lower in cost than other types of heat exchanger.

Clean operation. There is no need for refrigerant or oxygen, so the operation is clean and hygienic.

No poisonous gas. Since combustion is not required, there is no risk of toxic gases that may have leaked in the event of defective units. Unlike traditional coal or wood sources of heating, no chimney is required.

Small in size. They take up smaller space than other systems.

Ease of control Individual unit temperatures can be controlled more accurately by using a thermostat mounted on the unit.

Ozone friendly since no refrigerant is involved; this type of heat source is more ozone friendly.

The disadvantages of using electric HTR are

Humidity control can be a problem.

Higher cost / unit of heat than other fuels.

Best Room Heaters in India

  1. Fan heater (Also known as ceramic heater, convection room heater, blower room heater)
  2. Infrared heater (Also known as halogen, quartz, radiant room heater)
  3. Oil filled room heater (Oil heater, also known as oil filled room heater)

Fan with Heater

Fan with Heater also known as blower room heater
Fan with Heater

This is the type of fan heater that is convenient for heating a fairly large space in a short period of time. The ceramic coil heats hot air around itself, so the convection heater quickly produces heat and is safe to touch. This fan heater includes a fan that will let the hot air out and thus keep your living space warm. A convection chamber heater is not expensive and consumes less energy, so it can also be beneficial in term of cost. They are also known as ceramic heaters, convection heaters or blower room heaters.

Best fan heater

  • Orpat OEH-1220 Fan Room Heater
  • Orpat OEH-1250 Fan Room Heater
  • Usha HC 812T Thermo Fan Room Heater
  • Orpat OEH – 1260 Fan Room Heater
  • Bajaj Majesty RX14 Wall Mount Heat Converter Fan Room Heater
  • Usha FH3212-C Fan Room Heater
  • Usha 3213-H PTC Fan Room Heater

PROS:

  • The fan used in the ceramic heater provides instant hot air flow.
  • You can transmit that air flow in the direction where you need it.
  • They are perfect for small spaces i.e. office cabins or any small room.
  • The device actually cools down rapidly making it a safer option for families with children and pets.
  • They are small in size and provide maximum portability.

CONS:

  • Any ceramic heater that comes with a fan produces noise. Check decibel level and adjustable fan settings.
  • Difficult to clean dust particles, so people suffering from allergies should consider avoiding it.
  • Cannot keep the same temperature in a large room. Because the instantaneous temperature fluctuates in temperature.

Infrared heater

Infrared heater also known as radiant room heater
Infrared heater

Radiant room heaters are possibly the cheapest heaters that act like campfires and provide heat to their nearest locations. So it is useful for single person small room infrared heater. There is no fan of this heater,infrared heaters safe for babiesso it is not loud. In addition, it heats up quickly and uses less energy. Its only drawback is that it is not enough for large rooms or more people and the child is not safe. Its surface is very hot. They are also known as halogen, quartz, infrared based room heaters.

Best infrared heater

  • Bajaj Flashy Radiant Room Heater
  • Usha 3002-QH Halogen Room Heater
  • Orpat ORH-1410 Radiant Room Heater
  • Bajaj RHX 2 Halogen Room Heater
  • Orpat OQH-1230 800-Watt Quartz Heater

PROS:

  • Infrared heater heat objects and people do not get air, so the heating process is instantaneous. As soon as you turn it on, they start working.
  • Use light to heat so no noise is generated.
  • They are energy efficient. Heats objects and people directly so that no energy is wasted.
  • Small in size and easily portable.

CONS:

  • There is no limited heat space to heat large areas.
  • After closing the switch it cools really fast so the heat also decreases very fast.
  • Bright orange emits light which can be irritating to some people when it is used in the bedroom.

Oil filled room heater

Oil filled room heater also known as oil heater
Oil filled room heater

Oil filled radiators are one of the best heaters that, although it takes longer to warm up, are also good. Because they provide long-term heat even after the heater is turned off. It is also noisy like a ceramic convection heater.

Oil filled room heater consume less power. They are good for saving electricity. Since the oil is used as a reservoir, even if you turn off the heater, the room will still be hot. Oil-filled room heaters neither burn oxygen nor are the best choice for new-born babies. They are a healthy choice in this regard as it will not cause any suffocation or dry eyes, skin rashes.

Unlike a misunderstanding, oil-based room heaters do not require oil to be burned. Electricity is consumed to heat the oil, and then heat is passed through convection into the metal walls.

Best oil filled room heater:

  • Bajaj Majesty RH 11 F 2900 W Room Heater
  • Murphy Richards OFR13F 13Fin Oil Filled Room Heater
  • Crompton Greaves CG-ORH 3 Room Heater
  • Usha OFR 3209F Oil Filled Room Heater

PROS:

  • No fan is present, so that complete silent operation can be done. Bedroom, an ideal choice for workplaces.
  • Once the oil is heated, it provides constant heat throughout the room even after turning off the appliance.
  • Very energy efficient you enjoy the heat for a long time after turning it off.
  • Oil-filled heaters are best for heating large rooms.
  • No use of fan. The best option for those who suffer from diseases like asthma, dust, allergies, pet dancer allergy.

 CONS:

  • Highly priced. They are tightly sealed, designed with anti-tip and auto-off technology.
  • They are heavy and bulk and are not the best in terms of portability. Often come with wheel support.
  • The oil often gets too hot making them a poor choice for families with children.
  • No instant heater. The oil takes 20–30 minutes to heat and then serves to heat.

Room Heaters Buying Guide:

Fuel Types:

a)Electricity:

Heaters room is fueled by one of three types which are electric, natural gas or propane gas. We have a brief idea of ​​how they are used. However, a commonly used heater in India uses electricity as fuel.

All types of heaters commonly found are ceramic, oil-filter, and radiant heaters that you have heard are fueled by electricity. It is by far the most commonly used fuel type and in this article we will only talk about electric heaters.Originally, these heaters use electricity to heat metal elements which are then transferred to oil, ceramic, quartz depending on the type of heater. Most of the time the heaters are plugged into electrical sockets, meaning they are portable and easy to use.

b) Gas heater:

As the name suggests, gas for heater use a gas hook up and ignition source such as a matchbox or electrical ignition device. They are mainly used to heat the outside air so that you can party long after the sun goes down. Gas heaters heat air that lasts longer than electric heaters. While they are of two types, a natural gas heater is required to be wall mounted and a propane gas heater comes with a portable tank.

Natural Gas – Natural gas fueled heaters are always fixed and never portable, they are mostly wall mounted and sometimes mounted on the floor. Natural gases are usually connected to your home gas supply and installation should be done by a professional gas instrument engineer. While their installation is expensive, the running cost is downward. Keeping in mind, the location of the heater and proper ventilation must be taken into account for health and safety issues.

Propane – Propane gas heaters work by connecting to a propane gas filled tank. These tanks are portable and do not need to be connected to the gas line. They are commonly used in workshops, garages, industries and large cellars. Due to their portability, small size propane gas heaters are very popular in those who go camping or caravan.

Why is it better to avoid gas heaters?

Costly installation: Professional installation is required. You will also need a chimney to flush out the feelings created during the combustion process.

High cost: Installation through natural gas room heaters is less expensive and the primary cost is much higher than that of an electric heater.

Short Life Span:Gryphon gas heater price is again less an electric heater in closed room on average in the last 10 years.

High Risk: The biggest safety issue with gas heaters is the possibility of carbon monoxide leakage that is toxic which can cause death at high doses. Catching fire from gas leaks is another concern that should always be under control with proper maintenance.

Heating Technology

Best Room Heater Technology

Heaters heat the room using one of three techniques — convection, infrared, and microthermic — to heat the room. Some heaters heat the entire room, while others work by heating objects and the people around them. Below we are outlining these techniques, discussing the pros and cons of each.

A) Convection temperature

Convection heating is by far the most common heating method used for single room heating. Heating by convection are known for their ability to keep a room warm for the longest time. They conduct electricity across heating elements (e.g. electric wire / wire or oil) that then heat the air passing over the element; Hot air now heats the entire room by convection.

Most of the time the method involves a fan — also called a fan forced heater — to circulate heat evenly throughout the room otherwise it works without it.

Convection heat transfer using fans use fans to circulate warm air into the room. The fan takes cool air from the room and passes it over the heating element- ceramic or metal – the heating element heats the air which leaves the heater circulation as convection currents heat the air inside the room. They can heat a well-insulated space much faster without a fan than a heater, but like any other appliance with a fan, it also makes noise.

Convection heating without fan – Here the heating element is surrounded by water or oil and the process of heating starts at a slow rate. Because heating works by first heating the liquid and heat transfer in convectionthe heat to the surrounding air. However, they can produce more heat because the liquid stays hot inside the heater for a long time after turning off the device. Since it does not involve any type of fanning, the process is completely silent.

B)Radiant Infrared Heat

Radiant heating works completely differently from convention heating. Instead of heating the air, the heat further radiates objects and the people in front of it. Room heater mini are best for spot heating as they provide concentrated heat and energy dissipation is also reduced. They are not as effective as convection heaters in heating the entire room, yet the heat lasts longer because the objects stay inside and not in the air. The best thing is that they provide almost instant warm-up at a particular location, so they are extensively used in office rooms, bedrooms, living rooms and other small rooms.

Infrared heating works similarly to radiant heating providing direct to nearby objects. Originally infrared quartz bulbs are used as a heating medium to send heat out to specific areas but are capable of heating rooms over time. Both methods offer soft and consistent heat and are used for centralized heating.

c)Micro thermic heating

Micro thermic convection and radiant heat are both combined. Micathermic heater use electric coils to heat large, thin plates of mica that can retain heat for longer. This heat radiates to asbestos plates or sheets, followed by natural convection to circulate warm air throughout the room. This fan-less heating technology also saves room heating, works quietly and keeps dust and other allergies down which makes them the best choice for people suffering from asthma and allergies. Most of them should be hung on a wall or placed on the floor depending on how you want to use them.

Types of room heaters:

Ceramic heater

Ceramic room heater type
Ceramic heater

Ceramic heater use the positive temperature coefficient or PTC’s ceramic heating element. PTC elements show an increase in electrical resistance with increasing temperature. In simple terms, ceramic components, PTC heat elements, have a temperature control; the temperature decreases after reaching the desired level. This ensures the safe heating, energy savings and durability of ceramic heaters. Surprisingly, ceramic heaters can be both convection and bright.

Conductor ceramic heater

Conductor ceramic heater type
Conductor ceramic heater

By and large scale, ceramic heaters appear most often in convection form. In this type of heating method, electricity heats a series of aluminum parts (fins) that transfer heat to the ceramic heating element. At the same time, the unit draws in cold air from the base of the heater and pushes it over the ceramic element and metal parts, heating the air and spreading it into the room. Most convection heaters use fans to blow hot air into the surrounding space; this has the added benefit of helping to heat the entire room at a faster speed.

Ceramic Radiant Heater

In contrast, ceramic radiant heater still uses electricity to heat the ceramic plate, but they do not use any type of fan to vent or exhale. Instead, the heater radiates heat directly onto objects in its path. The Bajaj flashy radiant heater released heat temperature is higher than surrounding objects, which will have lower temperatures; these objects will absorb heat as it reaches them, raising their temperature naturally. Radiant heaters do not heat the entire room as convection heaters do, but the heat stays on longer because it stays within objects rather than air. Thus, radiant ceramic heaters are generally considered more effective for generating heat where it is needed. However, they will not be as effective if you need to move from room to room, as the heat does not travel with you.

Convection Room Heater

Convection Room Heater type
Convection Room Heater

Convection room heater mostly comes in convection form. This type of convection heater hatter power is first converted to heat by a set of aluminum plates, also known as fins, and then the heat is transferred to a ceramic heating agent. Meanwhile it starts to draw cold air from all around and pushes it over the hot ceramic element. Cooler air absorbs heat from the ceramic metal surface and circulates throughout the room in the form of convection currents. In most cases ceramic convective heaters use fans to blow hot air around the place. This provides rapid heating capacity to a heater.

Radiant-ceramic-radiant

Radiant-ceramic-radiant type
Radiant-ceramic-radiant

Ceramic heaters also use electricity to heat ceramic plates, but instead of using a fan to blow air, they radiate heat to nearby objects. The heat for the heater comes in the form of electromagnetic waves that are naturally higher than the surrounding objects and people; they take heat and raise their body temperature. A radiant heater, unlike convection heaters, does not heat the entire room because it directly heats objects and does not vent, so heat lasts longer than convection-ceramic heaters. So you can tell in terms of generating heat and stopping heat that they are more efficient, but they may not be as useful if you walk too much, not as much heat as you do.

PROS:

  • The fan used in the ceramic heater provides instant hot air flow.
  • You can transmit that air flow in the direction where you need it.
  • They are perfect for small spaces i.e. office cabins or any small room.
  • The device actually cools down rapidly making it a safer option for families with children and pets.
  • They are small in size and provide maximum portability.

CONS:

  • Any ceramic heater that comes with a fan produces noise. Check decibel level and adjustable fan settings.
  • Difficult to clean dust particles, so people suffering from allergies should consider avoiding it.
  • Cannot keep the same temperature in a large room. Because the instantaneous temperature fluctuates in temperature.

oil-filled heaters

oil-filled heaters type
oil-filled heaters

Oil room heater, also known as column heaters, is another form of convention heater. Even though they are called oil filled room heater, they run on electricity, oil room heater is used as a reservoir, not as a fuel. There are several metal columns with cavities inside the heater; a heating element at the base of the heater heats the oil which then flows through the cavity of the columns. The heat emitted from the oil is transferred from the metal walls to the surrounding air through convection and radiation. The columns are constructed as thin fins that allow exposure to more air as a result of which the heat is transferred rapidly to constant warm-up. These types of heaters take some time to heat the oil but provide sufficient amount of heat to heat the entire room.

PROS:

  • No fan is present, so that complete silent operation can be done. Bedroom, an ideal choice for workplaces.
  • Once the oil is heated, it provides constant heat throughout the room even after turning off the appliance.
  • Very energy efficient you enjoy the heat for a long time after turning it off.
  • Oil filled room heater are best for heating large rooms.
  • No use of fan. The best option for those who suffer from diseases like asthma, dust, allergies, pet dancer allergy.

 CONS:

  • Highly priced. They are tightly sealed, designed with anti-tip and auto-off technology.
  • They are heavy and bulk and are not the best in terms of portability. Often come with wheel support.
  • The oil often gets too hot making them a poor choice for families with children.
  • No instant heater. The oil takes 20–30 minutes to heat and then serves to heat.

Infrared heater

Infrared heater type
Infrared heater

Infrared heater is also known as radiant infrared heater which works by the same principle that heats the earth. It uses thermal energy that is transferred as heat to objects and people along its path. Two types of heating elements are commonly used by infrared heaters.

Quartz tubes

 Quartz tubes  type
Quartz tubes

These are encapsulated tubes, which consist of a nichrome heating coil made of 80% nickel (Ni) and 20% chromium (Cr).

Tubular heating element

Tubular heating element type
Tubular heating element

Tubular heating elements uses solid metal elements similar to internal heating wire as you usually find inside the oven to heat the surrounded metal casing so that the heat travels directly to the objects in front of it.

PROS:

  • Infrared heaters heat objects and people do not get air, so the heating process is instantaneous. As soon as you turn it on, they start working.
  • Use light to heat so no noise is generated.
  • They are energy efficient. Heats objects and people directly so that no energy is wasted.
  • Small in size and easily portable.

CONS:

  • There is no limited heat space to heat large areas.
  • After closing the switch it cools really fast so the heat also decreases very fast.
  • Bright orange emits light which can be irritating to some people when it is used in the bedroom.

Room heater design

Baseboard heater

Baseboard heater electric are modern types of convection heaters. They are low profile and can be anywhere in the room without occupying much space. They draw cool air in and push hot air out. Baseboard heaters are mostly filled with oil or water and take some time to dissipate heat but eventually heat the entire room by air convection.

Free standing portable heater

Oil-filled and radiator ceramic heaters are two common forms of free-standing portable heaters. They are the most popular heaters widely used worldwide. They also operate by convection heating method, similar to baseboard heaters. They usually have a shorter look except for oil-filled heaters that are heavier but come with wheel support for portability.

Wall heater

Wall heater is usually ceramic heaters with fans. In wall heaterare great at saving floor spaces. You can mount them anywhere on the wall and keep them out of the reach of children or pets. They operate at very low watts which saves a lot on your electricity bill.

Electric fireplace heater

Electric fireplace heateris appealing to the alternative of traditional room heaters. Electric fireplace heater portable mimics a chimney and sometimes creates a fire with LED lights. Heat is produced by radiation or convection. They do not require any major renovations to install, just plug them in and only operate as a “flame” or heater. They can heat rooms as large as 400 square feet and are ideal for living rooms, dining rooms, or any large room.

Room heater size and coverage

One of the most important things to note when purchasing a room heater is the size of the room that the heater will cover. If you use a room heater in a small room that is actually rated for a large room, you will waste energy and soon look for open air so that some hot air is moved in. In the exact opposite case, if you buy something that is not enough to heat the area you have chosen, the heater will be on and will never heat the room.

You can determine how much space a room heater is capable of heating, simply by using its wattage output. As a thumb, a room heater typically uses 10 W to heat each square foot for your space. This means that an average heater of 1500 W can heat an area of ​​150 square feet. Some heaters may consume more energy or cover more space.

Safety Features

The cool-to-touch feature says that the heater’s outer chassis or casing is heat resistant, so it can be safely touched. This feature is not common in every room heater. This feature is especially something to consider when you have young children at home to keep them safe from burning when the heater is on.

Tip from cut-off switches- Portable heaters are often relocated due to their small size and light weight. This in turn makes them very likely to fall or tip when something strikes it or when you try to move it. If you have children or pets at home, it is more likely to be pushed and held. Some heaters come with a cut-off switch to reduce any risk of fire hazards, which occurs when the device falls and cuts off the power connection to quickly turn on the device.

Overheat protection switch — found in many models, an overheat cut-off switch activates and automatically turns off the device when it rises to unsafe levels inside. High temperatures can cause something to melt inside or cause ignition.

This is the temperature before reaching after the device is automatically turned off.

Power cord – Choose a model that has a power cord at least 70 inches long. This will allow you to use an extension cord without having to keep the heater away from curtains, sofas, mattresses or carpets — which is not recommended.

Moisture control- Another important factor to watch especially when you are newly born at home. Typically, fan forced heaters and radiation heaters burn oxygen to produce heat. This in turn reduces the amount of moisture from the air and gives some feelings of nausea, dry eyes, itchy skin, dry nose etc. When using the heater it is recommended to have a bucket of water at the corner of the room. It is best to go for oil-filled heaters to avoid any such hot problems.

Optional features

Timer: A heater with a timer will let you keep it active for a specific time. This feature comes in handy when you sleep, you can set a timer for which it will work and then turn off. It keeps you warm all night.

Remote: Like all remotes, a heater that is remote controlled will allow you to control it from a distance. You can enjoy bed rest without having to walk on it to change the heat settings or device.

Other factors to consider

a) Power consumption

Wattage shows you exactly how much electricity is being used by the heater.

An average electric heater operates at 1500 watts of power, some with fewer watts and some uses more.

Suppose your heater uses 1500 watts of electricity. Now, 1000 W = 1 kW

So, your heater is using 1.5 kW of electricity.

But your electricity bill is measured in KW / hour, which is the amount of power consumed when a 1KW device is run for one hour. Use the following formula to find out the cost of using a 1.5 KW heater.

B) Energy efficiency:

Room heatersmay not function as your central heating system. Gas room heater are designed to heat small areas. So if you try to heat places larger than your capacity, they can cause your electricity bills to go up.

Unfortunately, room heaters do not come with an energy rating, so there is no particular way to compare them. Again, you cannot compare the energy efficiency of each type of heater because many factors exist that always impact their productivity.

The size of the space, the indoor temperature, what temperature is determined and how well the space is insulated is one of the factors that can vary the energy efficiency of a room heater.

c) Noise level

Like most household electrical appliances, a room heater also produces some noise while working. However, some models produce more noise than others. If you feel irritated by background noise then go for non-fan-forced models for silent operation. These are best for quiet room environments such as a bed room or office. Radiation, oil-filled heaters would work best in this case. Typically, a unit with a fan produces more noise than a unit without a fan. Check the decibel levels given in the product description, the higher the sound the higher the level.

d) Thermostat

Thermostat is probably the most valuable feature in a heater. A room heater has either a programmable thermostat or an adjustable thermostat. With a programmable thermostat you can set a desired temperature and the heater will automatically maintain the set temperature by turning the device on and off after a particular interval. While an adjustable thermostat cannot maintain the set temperature, the stills control the heat output based on your heat settings. Adjustable thermostats have buttons or dials that allow you to adjust the heat setting from low to high.

E) Size and portability

It is advisable for theheat room to come with castor wheels so that you can take them to any comfortable corner of your room. Often these have handles that are narrow, inset only and do not help with portability. This makes it particularly difficult to move for those who have joint pain or cannot lift heavy weights. Look for side handles and weapons that provide a good grip to make the device run smoothly without burning your hands.

Another indispensable factor of an easy portable heater is the size. If it is heavy and huge it will be difficult to move it from one place to another. Most fan forced heaters and radiant heaters have compact designs, so they are the best in terms of portability.

F) Price and Warranty

Good quality comes with a room heater price. With the high-end model you can get some additional features like remote control, energy saving mode, timer and bathroom friendly features. But there are room heater rod price decent models even at low prices, you may not experience all the things to be great but they will provide generous amount of heat to make you feel comfortable.For warranties, go for devices that have at least 6 months warranty if not. 1. You buy something before looking at the warranty details.

Precautions for using room heaters:

Room Heater is always advisable to follow some basic safety rules when using a room heater. They are made as safe as possible but still produce a lot of heat which can cause a fire if you misuse or do not take proper care.

Never store any flammable liquids such as heaters, alcohol, gasoline, kerosene or paint. Kindling elements such as paper or wooden furniture are also unsafe to leave around a heater.

Never leave the room heater without water for too long, as a fire can occur in any case of fire.

Keep the heater away from the curtain as the fan may suck the fabric inside and cause a fire.

Damaged heater parts must always be repaired before use.

Keep doors and windows closed while the room heater is on. Rain or flammable moisture can cause damage or fire.

Maintain at least 3 feet of clearance from the heater to avoid any possibility of knocking over it.

Always keep the heater on a flat surface.

Never use an extension cord to plug the heater. You can handle the wattage required to power the heater if you have to use it to make sure you get an extension cord that is well shielded.

If you have young children or pets at home, never leave the room empty while the heater is on. Always keep the device closed and unplug it before exiting the room.

Carefully read the security measures that come with the user manual.

FAQS FOR ROOM HEATERS:

  • Can I use my heater outside home?

Absolutely! A portable heater can be used for outdoor BBQ parties, fall picnics and overnight backyard camping adventures for neighborhood children.

If you are traveling, but have the uncertainty of accommodation that awaits you at the end of your trip; be sure to pack a portable heater. Do you eat ice fish? A small, portable heater would be a great gift!

Portable heater for room is also great for heating the office or lunch room, where you cannot control the air conditioning. Small spot heaters can be placed at your workstation by your desk to keep you comfortable. Super energy-efficient and very quiet, anyone can complain.

  • Is there anywhere I should not use my heater?

Although all portable heatershave built-in safety features to prevent overheating, there are some considerations that are worth remembering:

Even if you have used a portable heater in the past, read the manual when you buy a new model. Keep it with you to troubleshoot. You should have a problem operating the device.

Always keep your heater away from combustible objects and surfaces. Desi room heater also includes making sure that the power cord does not pass under a rug or carpet that is made of a flammable material. It is also necessary to understand the voltage requirements of your heater and plug it into the appropriate outlet.

Keep your heater away from moisture and do not place it in an area that is subject to leaks or spills. Do not try to handle your heater if your hands are wet. If you decide to store the unit during the warmer months, make sure it is in a safe, dry place, where young children cannot be found.

Do not place your portable heater in a tight place. Air must always be allowed to flow through the intake valve of the heater. If it is blocked, the heater will be wasting energy as it will have to work harder to draw air into the unit. This increases your electricity bill while reducing the lifetime and efficiency of your heater.

Never keep a heater empty. If you do not plan to live in the room or area where it is located, turn off the power. Never place a heater where it can be tied by pets or children, and make sure it is always on a stable, flat surface.

  • How can I save money using my heater?

Make sure you have a heater that adequately meets your needs but is not very powerful for the location where it is located. By using wattage and BTU you can correctly calculate the heating capacity required by a suitable heater.

Turn off the unit when not needed. Remember that some types of portable heaters will require a few minutes to heat up, so see the manufacturer’s guidelines as to whether this is necessary.

Properly maintaining most portable heaters is an easy task. There is no need for professional servicing unless you have problems with the unit malfunctioning or overheating. Do not attempt to fix the components inside the heater by yourself; however, this may invalidate the warranty. With regular cleaning and a little TLC, your heater will keep you warm during many winters!

  • What are the best room heater brands?

In India, the brands most liked and trusted by customers are Havells, Usha, Bajaj, Morphy Richard, Delonghi, and Crompton Greaves etc. They are available in Amazon and Flipkart.

  •  How much does a room heater cost?

The most popular ceramic fan heaters come in 1000-2000. But if you want advanced features like remote control, timer, thermostat, and then it will cost you around 5000-7000. You will find the cheapest models of infrared room heaters around 1000-1500. Oil filled heaters are expensive and the starting range is 10000.

  • Room heater or centralized heating system, which can save money?

Actually, it will depend on you. If you are planning to buy separate heaters for different rooms then this is not possible, it will consume a lot more power than a centralized heating system.

If you live in a soothing climate where you do not need centralized heating throughout the year, choosing a room heater is necessary to be more cost efficient and energy efficient. Heat the room before crawling on the bed, heat it to a comfortable temperature, unplug the device and enjoy a good night’s sleep.

  • Does a room heater produce carbon monoxide?

No electric heater emits carbon monoxide. Carbon monoxide is released when you burn fuel and electric heaters do not burn. However, if you buy a gas heater there is a possibility of carbon monoxide poisoning, for this you need proper ventilation and a chimney. And we suggest you not to opt for gas heater.

  • Is it okay to leave the room heater unattended?

No, never leave a room heater on. This is even more serious if you have children or pets at home. They can touch it and burn themselves, drop the device down or put some flammable on the side or on top of it that can ignite the fire. Always unplug the device before being in the room.

Conclusion

Room heaters in winter are true lovers. It provides warmth to the entire room and its corners, making you forget the bitter cold. They are available in various types and models, making it difficult for a first-time buyer to make a choice. The purpose of this article is to solve this problem.

The article has provided you with a comprehensive buyer guide that gives you all the important factors you need to note before making a purchase.

LEAVE A REPLY

Please enter your comment!
Please enter your name here